These comfortable gloves have tensile quality of natural rubber, with minimum latex sensitization (reducing the risk of allergy Type I), and offer resistance to a wide range of acids, bases, and alcohol. Gloves of different batches have minimal variation in properties, and provide better consistency as compared to natural rubber.
Dermashield, made from a proprietary poly-choroprene blend, is free of latex proteins and accelerators. It is the ideal choice in the prevention of both Type I and Type IV allergies.
Its Neoprene composition offers chemical resistance to a broad spectrum of chemicals without compromising comfort and flexibility.
This product comes with Ansell’s proprietary SureFit Technology, which eliminates cuff roll-down and prevents chemicals from entering the glove.
Clean, sterile and ideally suited for ISO class 5 (class 100) environments.
The most secure fitting advanced glove solution in allergy prevention
An advanced glove solution against Type I and Type IV allergies associated with natural rubber and accelerators, these gloves are ideal for ISO class 5 (class 100) environments. With its Neoprene composition, it offers resistance to a broad spectrum of chemicals. Workers in Life Sciences can now enjoy greater protection and gloves secured around their arms thanks to Ansell SureFit Technology that prevents “cuff roll down”.
|Glove Design||Hand specific and bisque fIngertips|
|Sterilization||Gamma radiation: Sterility Assurance level (Sal) 10-6|
|Clean Room Compatibility||Gloves are packed in a controlled environment and labeled with a Isopropyl alcohol resistant ink packaging. Recommended for class 100 (ISO 5) areas. Grade A Clean Room Suitable.|
|Audit Standards||Manufacturing Facility Registered to ISO 9001, ISO 13485 and ISO 14001|
|Quality Control||In compliance with ASTM D 3577, Type II|
|Packaging||One pair per poly wallet, sealed in a poly envelope; 10 pairs per outer polybag; 5 sealed outer polybags per master polybag; 4 sealed master polybags per lined carton; 200 pairs per carton|
|Storage||Cool environment, shielded from ozone and UV light|
|Country of Origin||Malaysia|
|Property||Typical values||Testing method|
|SIZE||6.0||6.5||7.0||7.5||8.0||8.5||9.0||ASTM D3767/EN 420|
|Nominal Length (mm/inches)||310/12.2||310/12.2||310/12.2||310/12.2||310/12.2||310/12.2||310/12.2|
|Average Palm Width (mm)||77||83||90||95||102||109||120|
|Freedom from Holes (Inspection level I)||1.0 AQL||ASTM D5151/EN 374-2|
|Palm Thickness Single Wall||(mm: 0.19) / (mils: 7.0)||ASTM D3767/EN 420|
|Particulate Count||≤ 2000 Counts / cm2||IEST-RP-CC005.2-7|
|Endotoxin||10.4 EU/pair of gloves||ASTM D7102|
|Before Aging||After Aging|
|Ultimate Tensile Strength||≥ 17 MPa alongside||≥ 12 MPa alongside||ASTM D 412-06a|
|Elongation at Break (%)||≥ 650 alongside||≥ 490 alongside||ASTM D 412-06a|