These comfortable gloves have tensile quality of natural rubber, with minimum latex sensitization (reducing the risk of allergy Type I), and offer resistance to a wide range of acids, bases, and alcohol. Gloves of different batches have minimal variation in properties, and provide better consistency as compared to natural rubber.
Excellent Puncture Resistance
Three times the puncture resistance of latex or PVC disposables.
Comfort and Chemical Resistant
Made from an innovative nitrile compound which offers outstanding chemical and mechanical properties, comfort and dexterity
Contains no waxes, silicone or plasticizers.
Avoid Cuff Roll Down
Rolled cuff. Provides added protection at wrist and ensures a secure fit.
Textured finish on fingertips.
Applications (Lab & Utility)
Textured Single Use Nitrile Gloves
These gloves are manufactured from an innovative nitrile compound, which offers exceptional chemical and mechanical properties, in addition to unmatched comfort and dexterity. These gloves have three times the puncture resistance of latex or PVC disposables. Thanks to their 100% Nitrile composition, these gloves contain no waxes, silicone or plasticizers, and help the wearer avoid Type I allergy due to Natural Rubber Latex. Wearers using these gloves for lab applications will find them especially useful as they offer an improved grip, which is attributed to their textured finish on fingertips.
|Glove Design||Ambidextrous, Powder Free, Textured Fingers, Long Cuff|
|Audit Standards||ISO 9001|
|Quality Control||EN420, EN374/1,2,3, ASTM D 6319, FDA 21 CFR 177-2600,Arrete 09/11/04, European Regulation 1935/2004,German Recommendation for Food Commodities.|
|Packaging||100 gloves per dispensers, 10 dispensers per shipper carton, 1000 gloves per shipper cartons|
|Storage||Keep out of direct sunlight; store in a cool and dry place.
Keep away from sources of ozone or ignition.
|Country of Origin||Thailand|
|Property||Typical values||Testing method|
|ASTM D3767/EN 420|
|Nominal Length (mm)||300||300||300||300|
|Average Palm Width (mm)||85||96||105||111|
|Freedom from Holes (Inspection level I)||1.5 AQL||ASTM D5151/EN 374-2|
|Palm Thickness Single Wall||(mm:0.11) / (mils:4.3)||ASTM D3767/EN 420|
|Before Aging||After Aging|
|Ultimate Tensile Strength||> 14 Mpa||> 14 Mpa||ASTM D 412-06a|
|Elongation at Break (%)||> 500%||> 400%||ASTM D 412-06a|
|Force at break||> 6||> 6||EN 455-2|